How to remove paint from concrete? Its 8 mind blowing methods

The most commonly asked question was how to remove paint from concrete. Concrete readily absorbs liquid like paint because concrete is porous. The paint can seep millimetres deep into the concrete surface due to this it is a challenge to find out how to remove paint from the concrete with this but it can be done by many methods. How much time it consumes depends on the area you are dealing with.

It is difficult to scrape it off with a stiff brush or with some hard material so it is important to find the right method for it. The task should not be hard if you have the right tools and equipment to remove the paint from the concrete.

Powder washers and soy-based gel cleaners etc are commonly used to remove the paint from concrete. Without any chemicals, the pressured water can also remove the paint from the concrete.

Common Methods For Removing Paint From Concrete:

There are many commonly used methods for removing paint from concrete:

1: Chemical Paint Strippers:

Today, many chemical paint strippers are available that remove the paint from concrete. The common one is mineral spirits and if the common strippers do not work find a more suitable product.

Soy-based gel cleaners are also applied to the paint and allowed the gel to stay for a bit and then wipe off. It is also cost-effective.

With all of the chemical strippers, you need to apply them to the paint, wait for it and then remove the stripper along with the paint with a scrub brush. When most of the paint is scrubbed off, wash the area to ensure the paint is gone.

2: DIY Paint Strippers:

You can make your own paint stripper for tough spots. How much material do you need, you do have not to do your own estimation. It depends on how thick the stripper is. Make a paste with a stripper and add paint thinner, the material will soak in the paint and makes it easy to strip off.

After applying to allow the mixture to dry for some time depending on your mixture. Once it is dry use a paint scraper to get the mixture off.

3: Soda Blasting:

Soda blasting is also a good option for removing paint from concrete. You will need a soda blaster and also it is important to get the right kind of machinery because with sodium bicarbonate standard sandblaster will not work.

To get a close finish hold the nozzles of the blaster close to the ground and move it to the painted area. Soda blasting does not damage the concrete underneath and is more environmentally friendly than chemical strippers but it is an expensive option.

Try to remove the plants if you are blasting near plants because high PH soda affects plants’ life.

 4: Powder Washing:

Another popular way of removing paint from concrete is powder washing. With high water pressure to wash the paint away, you can use a hose and the force of water removes the paint. You do not require chemicals for this process because the pressure of water will do the work.

Powder washing may not be enough to get the paint out if the paint has been on for a very long time.

5: Absorbent Paint Stripper Method:

Make an absorbent paint stripper, mix equal parts of finely ground clay, and paint the stripper together to create a thick paste that can be applied to painted concrete.

Then apply the paste and let it sit for some hours then use a scrub brush and remove the paint and repeat once again.

 Removing Spray Paint From Concrete:

For removing spray paint use a mixture of tri-sodium phosphate and water. Trisodium phosphate is a chemical compound that can help in removing grease and stains from concrete and common product in household cleaning products.

Apply the mixture to the painted area and let it sit for some time then use a scrub brush to remove the paint.

Removing Latex Paint From Concrete:

1. Clean the area
2. I use ammonia because ammonia is a common household cleaner. Apply the ammonia solution and let it sit for some hours. Ammonia causes paint to bubble up then scrape the paint with the scrub brush.
3. Use the paint thinner
4. Use alcohol because alcohol is also a household chemical and is used for removing the paint from the concrete surface.

Removing Paint From Concrete Without Chemical:

If you want to remove paint from concrete without using chemicals then a pressure washer and soda blaster are the eco-friendly options.

There are also nontoxic paint strippers such as soy gel, nontoxic, biodegradable paint strippers, etc.

Water and pressure washer is the best method for this you have to clean the surface and let it dry, apply paint stripper if needed then let the stripper sit for some time. Then scrub the area and wash the affected area. Repeat once again and clean the concrete.

Removing Oil-Based Paint From Concrete

1. Oil-based paints are harder to remove, try to loosen the paint and chip away by using a paint scraper.
2. Use pour directly onto the remaining paint residue after removing the paint.
3. To finish the job using a pressure washer.

Removing Paint From Concrete Walls:

There are several ways to remove the paint from the wall

Step 1: Scrap it off

scraping is the most common way of removing paint from concrete walls. Place the blade of the scraper against the wall and start to push it under.

Step 2: Paint stripping agent

The paint stripping agent is perfectly suited for removing the paint. The proper, easiest, and quickest way to remove the paint is to use chemicals, stripper softens the painted surface by which the paint can be easily removed. 

Step 3: Heat Application

Heat is also used as one of the methods for removing the paint from the concrete. Clean the painted surface and prepare your heat gun, once it heats ups points at the wall 5 inches away from the surface then you have to scrape away the paint.

Read Also:

1. What is concrete?
2. What is Mate foundation
3. Pier and beam foundation repairs